Argon Flow Meter
4.85/5
CODE
RT-FM2
In stock
Order in for UK Mainland delivery on 12/11/2024
Flow Meter for Argon and Argon/C02 welding gas
- High quality flow meter with 0 - 14LPM flow rate - Ideal for MIG & TIG
- 3/8 BSP fittings - Fits between your regulator and gas hose
- 0-25 Litres Per Minute (LPM)
- Save on wasted welding gas by fine tuning your flow rate
Video Reviews & Guides
Excellent
Argon Flow Meter
product reviews
698
product rating
4.85/5
product experience
calculated from 698 customer reviews
positive
98%
Neutral
1%
negative
1%
latest reviews
-
It's a tig gas flow meter, does exactly what it says in the ad ;-)
-
Hobby
-
10 out of 10
-
Top quality product, prompt delivery
-
Arrived in a timely manner and is of great quality.
-
Does the job.
-
fine
-
Nice product well packed
-
Looks good, I will know more when we get accustomed to using the machine
-
Simple does the job
-
Great addition to MIG gauges, easy to see flow rate with needle valve control
-
Useful, and great value!
-
Not installed yet so can't comment, but after spending a tidy sum in the last couple of weeks the delivery and packaging was appalling and would not recommend buying this if this is how it is packed and delivered
-
Only set up machine yesterday and am away till wednesday but can not wait to get making my next project. Great little machine and would recommend to professional and hobby welders.
-
Quality item allowing more accurate flow of the welding gas
-
Does what it's supposed to do.
-
Not used one before, but definitely a helpful addition to judging the right flow rate for the weld. Easy to set up too.
-
I am learning Tig Welding and the flow meter is a valuable addition to my setup. I recommend this item to anyone who is tig welding. The product is very good, robust and great value for money.
-
Used for tig welding, recommended for similar.
-
Used to monitor flo to tig welder.
-
Is concert with the reguator for maintaining the correct gas flow when welding. I would recommend this gas flow meter to all my friends who work on their hoobys or in a professional setting. The gas flow meter look and feels of prefessional quality.
-
Not actually used it yet but the welder I brought is great so probably the same quantity
-
I am over the moon with my new R-tech tig 162dc tft welder Fantastic product outstanding quality I would certainly recommend this product without doubt. I?m using for the restoration 1970 triumph tr6.
-
I'm a hobby welder, but the performance of this kit is a real confidence booster too.
-
Very good.
-
Purchased to use on my Mig-180. Easy to setup and use.
-
Fitted to regulator, and hose to tig welder. Seems well made, clear easy to use and see ball float.
-
Thankyou.!
-
A lot better
-
for making sure the right amount of gas is going to the end of the torch anyone who is tig welding very good quality well made
-
Does job
-
So far so good
-
Worked as expected
-
As described and work fine
-
Stainless and alloy ,recommend to anyone who would listen, quality seems good
-
does the job
-
*****
-
Resale
-
Perfect product
-
Ace
-
Not used yet but looks substantial.
-
I use the argon flow meter for mig and tig welding. I would definitely recommend this device to anyone who wants a good, well made, accurate flow meter.
-
hobby ,to my friends and wprk colleages quality is spot on
-
Seems to work well. The video advice to mark the ball bearing with a sharpie so you can spot if there are any leaks in the system, spot on.
-
Always a Great fast service
-
Excellent service
-
really good quality Every hobby welder should use a flow meter as it regulates flow not pressure. I use this for both hobby and work
-
I bought a 180 Mig welder some time back and recently wanted a gas flow measure to better judge the amount of gas I was using for my welder. In both cases I'm happy with the items and so far seem to be good quality. I am now more a hobbyist, retired and just enjoy making projects.
-
For adjusting the exact gas pressure and maintaining it while welding I would recommend this product to anyone using tig welding the quality of the product was excellent
-
Does what it says on the box
-
not tried yet.
-
Welders
-
great lets you now how much gas you use so no guessing involved
-
Does what it says on the box
-
Good budget flow meter. Only criticism is the plastic regulator knob, but it is a budget part after all.
-
Bought as a replacement as previous one got damaged during transit. Good quality at great price
-
Perfect flow meter for my gas gauges
-
Great
-
Easy to use and saves gas
-
Nice and flow-y
-
Used already, works perfectly
-
Tig welding, my friends, outstanding.
-
First class
-
Dose exactly what it says on the tin
-
This welder so far is excellent, can't fault it!
-
Vg.
-
Great product
-
Not used the product as yet but it looks good quality and robust.
-
Great product if a bit fragile. My only issue was the postage, which would make me think twice before using your company again
-
used with our mig and tig sets recommended for welders good quality
-
Works good
-
Well made and sturdy
-
Easy to use and fit. Definitely worthwhile watching the associated video. Recommend
-
Used on a 'hobby' basis but this may change soon? I found the 'Quick settings' helpful for an out of the box experience and with information reading materials the welder is easily configured to accomplish good welds in many materials. Build quality is good and appears to be of the 'Everlast' brand being very similar with very good reviews for this R-Tech variant despite its lower 170Amp rating however, this was a deciding factor due to my electrical supply at present. I have already mentioned this welder and the company to a couple of friends in the motor trade and fabrication industry who showed an interest. As it is a little early to say how durable this welder will be I can only go on previous reviews seen on the internet and machines in regular use for some years seem to be praised for their build quality. Hopefully once I pick up the gauntlet where it was left and I become more acquainted with this machine I shall perhaps post a review to my YouTube channel but I'll need to get my 'Dimes' in line before that. All in all a great experience from web to workshop this has been effortless, my only regret is not buying this machine a year ago when I first saw it. If I had any suggestions for improvement? The Everlast you tube channel has quite a few 'How to' guides from 'Ambassadors' relating to actual welding tips and tricks that given the similarity in machines is very helpful. For the sake of flooding the internet with yet more content but at the benefit of the R-Tech product, this would be a great addition to the companies profile and definitely aid those buyers just starting out on the journey into the dark art of joining metal together (and us 'ol timers that are used to oil cooled stick welders of museum quality) Many thanks to the R-Tech team for their help, keep up the good work.
-
I could not use this device because I could not fit the regulator and the flowmeter at the same time to the hobbyweld bottle that I use.
-
Very professional
-
Received promptly and great quality product. Recommended great little British family company.
-
Great product. Simple to use and prevents wasting gas.
-
Fitted with no drama and was instantly gas-tight. Used to monitor supply to MIG welder. The product appears to be robust and well made.
-
Good
-
Good quality and price
-
Not used yet
-
home workshop
-
fine it does what is says
-
I have an R-Tech MIG180 with which I?m learning to weld. I?d recommend it to anyone as it was recommended to me.
-
Good quality product, does exactly what it should
-
works well, hope to save some argon with this.
-
Easy to read
-
Ideal for the bottle used
-
Works exactly as it should. Probably paid for itself in saved Argon already.
-
not used yet
-
Quality on point
-
I will use this product to fit a finer control of my Argon Gas!
-
Quality
-
Very simple to set up and use to control gas flow rate - seems pretty robust.
-
Used to prevent excessive use of expensive gas - works very well enabling accurate control of flow rate. This product will quickly pay for itself with saved argon gas. I would say it is essential, the bottle gauges alone are not a very good way of measuring flow accurately. Good quality product at a very reasonable cost.
-
Essential for any welder.
-
Well made best mig iv used
-
34 Flow meters ordered and 34 good quality flow meters arrived in good working order.
-
I ordered one before and have it on mini disposable cartridges of argon. I had so much trouble online shopping for cartridges which actually had a full charge of gas in them I upgraded to Hobbyweld and this is to partner the provided regulator. The Informative video on the company website makes a strong pitch for these straightforward devices being a key part of anyone's gas delivery system.
-
Just attached to my mig welder to make gas control more efficient. Good quality Highly recommended
-
excelent quality and good value
-
Great service enough said !!!!!
-
Good product and price and works well
-
Very good product
-
I am using this to supplement the mini regulator on disposable shield gas cannisters. A necessary economy. I think anyone using those would benefit from tighter control on flow rates. Its really well engineered and the cheapo regulators that are all we can get online compare poorly with the neat little flow meter. Great product and very affordable.
-
DIY Anyone who'll listen Without taking it apart i'll impressed
-
Fits perfectly and very reasonable price
-
Used regularly in the garage on cars definitely recommended to anyone.very high build quality
-
easy to use and fit
-
Works well, removes pre-surge of gas and allows flow to be easily set
-
Bought for MIG. Have one for TIG. Very good
-
Not used yet but quality is good and do not foresee any issues
-
Very good product, easy to use, recommend to anybody setting up mig
-
Good value for money item and does the job as required.
-
Good quality and simple to set up
-
good product
-
customer service were excellent to deal with
-
Good quality product.
-
Works well
-
Fits directly to the pressure reducing valve. Takes second to fit. Argon is expensive and this little flowmeter will allow accurate setting of argon flow-rates. It's not expensive and it could save you a load of money! Well worth the investment. Every welder should have one and, for the price, it's very good quality.
-
Outstanding product
-
Tig welder argon control
-
Does the job
-
Upgrading my hobby mig welder and read the reviews and watched R-Tech video . Item is very good quality and is so accurate . Next item will be new welder . Just unsure if it?s a new mig or tig . Either way R-tech will be my 1st choice
-
Quality is impeccable, which makes it very easy to fit,. adjust and read. Very happy with this, and the easy of keeping the gas rate exactly where it needs to be, and avoid wasting it. I was afraid it may be very fragile, but with a bit of care in keeping it out of harms way, it has proven to be durable in the workshop.
-
good product
-
Seems ok to me but it looks like the regulator has a flow meter I didn't know about
-
Easy to fit and infinitely adjustable. No more guessing games.
-
Didn't come with any fittings so not much use
-
Good quality flow meter easy to set up
-
Does the job
-
Good value
-
not used yet but look like a good quality piece
-
fast delivery
-
Although not a high user of welding gas as a DIY welder, the flow meter does afford a more accurate setting than just relying on the regulator. Also the neat tip in the R Tech video does ensure that any slight leakage is easily noticed by the added *** on the ball bearing.
-
Did what it said!
-
Like it
-
Only purchased based on reviews and recommendations that it would allow finer control of gas flow. In use it does make controlling the gas flow easy and should hopefully allow me to optimise my gas usage. I'm a scrimper and would hate to be wasting gas.
-
Good quality product
-
Good quality at a good price.
-
works as it should
-
Excellent piece of kit
-
Yeah seems OK, does what I need it too.
-
Good product
-
Just the job.
-
Brilliant
-
Nicely made. The control valve is smooth and progressive. Threads are well-formed - no squeals when you ** them up.
-
It was a little sticky at first but after the first week of use all the gauges are working smoothly.
-
Very good
-
Good quality item and reasonably priced.
-
Great quality for the price, solid piece of brass
-
pass
-
I've not fitted it yet
-
Lets see!!
-
Not used yet but looks like it's good quality
-
Great product, fit for purpose and well priced
-
Works well as expected
-
Excellent kit to supplement the argon regulator I purchased.
-
it seems to work ok
-
Make's gas flow more accurate stop wasting gas and provide enough for shielding great quality perfect machined threads
-
I bought the flow metre to compliment an RTech regulator I bought for my newly set up tig welder, it will enable me to better manage my gas use without affecting the quality of my welding. My neighbour is learning to weld with me and I?ve recommended he also purchases one . As with all the RTech products I have purchased the quality is second to none.
-
works perfect
-
Great quality, works well.
-
Highly recommended Great product
-
Good quality and as expected
-
This is saving me gas from the day I got it. Much more precise than my regulator
-
Fantastic product Very happy Thank you
-
Well designed Argon flow meter good quality materials would offer as optional purchase if ordering a welder, recommend to all from DIY to more experienced user
-
Great addition and very reasonable price
-
I found the product to be solidly made and I followed a clever Tip I saw on the one of the website videos to mark the folwmeters ball with a felt tip to observe and detect if any leaks are present in the system.
-
good quality
-
Great value for the money.
-
Fair quality at a reasonable price
-
excellent value for money
-
Home use for tig welding metal gates. Easy to use and understand for beginners, good quality product.
-
Again haven?t used it yet.
-
Good quality at a reasonable price.
-
I have tested this with air. It will help me protect welds while saving expensive gas (and the environment).
-
Used I my small workshops for repairs. Recommended this product to anybody. The quality is excellent
-
Good value, eas
-
Great so far no issues! Great quality product would highly recommend to everyone.
-
Does exactly what it says on the tin
-
A standard Flow Meter, easy to use and read, no issues at all.
-
Good value.
-
Although using a new regulator the fine adjustment is still a rough adjustment of gas I found with this Argon flow meter it gave me much more controllability which will equate to around 30% saving in gas
-
Good flow meter
-
haven't used yet so can't really comment but seems to be good quality
-
Fist class quality
-
Very high quality equipment
-
Good quality product. The flow meter gives a more accurate reading than a regulator.
-
Good
-
Good.
-
Nice well made metre for the price. would recommend
-
Quality very good.
-
Quick delivery, looks like good quality, haven't used it yet
-
Its a well priced flow meter!
-
\quality of product appears adaquate for my needs.
-
Quality is excellent and everyone I know that welds will know how good a service I got even if I am just starting out as a newbie.
-
good guage better than the regulator guage
-
Fine
-
Works well and much more accurate than the gauge.
-
Fine and stable- I would like makings on both sides as I have to keep walking around it
-
Good quality, adjusts to gas flow, excellent .
-
I needed a product to monitor the gas flow to a caravan cooker. I substituted the steel ball with a lighter plastic one of the same size. It does exactly what I needed. I think it is a really well made gadget at a very reasonable price.
-
Quality product
-
Haven't had opportunity to use welder yet but everything appears to be amazing quality for the price! I was impressed with the heavy duty trolley which was far sturdier than I expected for what I paid.
-
good quality
-
Good product
-
Great value
-
Ideal!!
-
Another excellent quality
-
Happy with product
-
Good quality product
-
Very well made product and the price was excellent. Why pay more .
-
Seems all good
-
I wouldn't be without it. Saves a fortune on gas knowing I'm using just what I kneed and no more. Would certainly recommend to others.
-
Looks the business but haven?t tried it as yet
-
Waiting gas delivery soon, not expecting any problems.
-
I have intended on getting one of these for some time for the mig. Nice to know i won?t be wasting any gas in future.
-
Excellent bit of kit well worth purchasing. Gives much finer and accurate flow rates and monitoring.
-
Flow meter used for Tig welding and pipe purging with Argon. I would recommend to anyone looking for precision metering of gas Excellent quality and price.
-
seems to be an ok product no problems so far
-
Accurate measure of flow saves you money in long run.
-
Works well and saves gas.
-
Perfect quality
-
Used with mig welder. You need to know the actual gas flow to the torch. Recommended to anyone with a mig setup. I also have one on tig welder setup. Quality is good, seems to be well made. The flow control knob on this last one it stiffer to rotate than on the last one but that doesn?t hinder its operation.
-
Regulator appears to be good quality and works as expected.
-
On hobby gas cylinder Good quality
-
Great quality
-
Very good
-
Works as it should
-
Gauge is used on a hobby welder bottle. I would recommend this product if anyone is looking for a flow meter gauge. Product is of good quality and does exactly what it was bought to do.
-
Does the job and well constructed
-
Minor quibble, but I would have liked a dual scale.
-
I use it on my R-Tech180 Amp Portable Inverter Mig Welder, the Flow meter looks and feels very well made. I would recommend this flow meter to anyone who has a Mig ***er, as it is far more accurate than a pressure gauge. This in turn ensures you have the correct amount of gas for the ***ing you are doing (too little gas or too much = poor *** and potentially wasted gas).
-
*** so far
-
my son and i are welding alloy brackets the welder works great
-
I had suspected my regulator reading a bit high so bought a flow meter, fitted it and it was easy to set the correct flow rate for the job, regulator was 20% low.
-
Does exactly what it should
-
Nice quality
-
For occasional mig use. Not used it yet, though seems well made and other R Tech has been very good. Would recomend to others on classic car forums
-
A longer neck on the input side would be beneficial as the body of the meter impacts on the (full ring) handle on the Argon bottle, resulting in the meter having to be at an angle. Maybe a machine mounting option would be good.
-
A nice touch and Also so easy to fit.
-
Simplifies the use of gas flow reducing wastage.
-
As a welding begginer, after watching a few videos on youtube it made sense to use a flow meter as it's relatively inexpensive and could save money in the long term.
-
Excellent bit of kit very useful
-
used for controling argon when tig welding. would recommend to friends. good quality product.
-
good product
-
Good quality product
-
Handy addition
-
Quality product.
-
All good
-
Easy to set up and use
-
Perfect for getting the flow of my mig spot on.
-
Nice addition , takes some of the guesswork out of the job and saves in gas wastage.
-
product seems to to of a high standard
-
Flow meter is used as it should be, it's good quality and would recommend it and R-tech.
-
Looks well made and good vfm. Worthy of 5* if it proves reliable long term.
-
Seems like a quality piece of kit, no issues so far. Even gives a good tip in the description; draw a line on the ball so you can see movement/flow at very low flow rates.
-
Works well
-
at this price ok
-
nice freebie
-
As promised
-
Item is well made and to a high standard the product will be used to accurately feed my mig welder
-
I bought 2 of these 1 for a previous purchase of my rather large and rather more expensive water cooled tig- welder and the other was for my new 180amp inverter mig welder they are very useful, however you do loose a bit of getting them set correctly.
-
Only bought a few parts but can't fault any of it.
-
Cheap and cheerful does the job
-
Good value. Nicely made.
-
10/10
-
Good flow meter , but struggles to get a good seal onto a gauge.
-
Decent flow meter at a fair price.
-
As above
-
Had a lot of flow meters from R Tech and not had a problem with a single one. Excellent again.
-
Simple flow meter which fits inline works well and gives a better indication of the amount of gas being used. Before having these there was no way of telling the flow of gas and ended up using far more gas than required.
-
Hobby welder, anyone interested it getting going welding. Very good quality product.
-
First class
-
Smooth adjustment on this gauge. Would like a visible mark on the ball to see low leakage
-
Works as expected and advertised. No quality issues
-
Good quality
-
Thanks for including this in the deal!
-
Good price and good quality
-
Great product
-
I have just starting to learn TIG Welding and needed the flow meter to accurately gauge the argon flow rate. I would recommend to my friends and work colleagues. Quality of the meter is very good.
-
Good quality product. Easy to install and set up.
-
Does not work. I think this one is faulty.
-
Recommended. Great quality product.
-
Purge kit. Anyone welding stainless tube Rally good no issues
-
It does what it says on the box what more can I say
-
As described
-
Very handy, v easy to use and set up
-
Great to see the actual flow rate, knowing there's sufficient, but not wasting gas
-
Good product
-
Nice simple to use flewmeter. Recommended to everyone who uses gas, relying on the current gauges that are built in to regulators. Quality is great " for the price"
-
Haven't used it yet but looks well made
-
It?s my first time using gas this seems to be doing the job
-
Quality good for the money and would recommend it
-
Simple but effective very good.
-
Good products
-
On gas bottle
-
Good product, helps save on gas.
-
Works as it should!
-
Good quality and simple to use.
-
works fine, i even drew a line on the ball !!
-
Welders don't type.
-
Good quality as expected
-
Good quality item
-
I brought this tig welder as a long term investment going for the biggest i could having a good power supply to my workshop only being a hobbyist this welder is probably over ** but i only wanted to buy once I recommended a friend who purchased a unit for his business before id ordered mine and hes been over the *** with his Not having set it up yet im unable to comment on the quality but i Brought *** because of good reviews on the product and the customer service being viewed as second to none The only Problem ive had has been with your delivery Partner DHL It seems your are paying for next day delivery and after 3 delays and nearly a week passing i took the move to collect myself I feel they are letting you and your customers down which i some case my lead to people going elsewhere for smaller consumables etc that may be needed in a hurry for Paying Jobs Cheers Trav
-
Top quality and part of the package.
-
I use the welder for personal projects and would be happy to recommend it to anyone, the quality is good.
-
As expected
-
It?s a flow meter
-
Does the job
-
Use for getting the correct amount of shielding gas Useful for both MiG & Tig Welders Good value for the money & saves you wasting shielding Gas
-
Really easy to install and the tip on the video shows this is company that cares about their customers
-
Perfect for what I needed and reasonably priced
-
For my TIG welder To my mates Seems OK
-
I just think you should include one with the welder and add the cost to the package as it?s mentiond on all videos. It works really well
-
Not used it so cant comment
-
Excellent
-
Following the instruction on the video, I removed the ball and marked with a black line. However, it was fortunate that I had a selection of 'o' rings at hand as the original one was damaged.
-
Hopefully does what it?s for
-
Quality item
-
So easy to attach. I even knocked up a bracket and fitted it remotely. Wasnt an issue and will help save on gas and the guestamation of how much is being used.
-
Very nice flow meter. Good price and useful, relevant advice on the website. Very impressive.
-
very good welder nice quality for the price
-
Simple device which improves accuracy of delivery, potentially saves gas and therefore money.
-
Not to bad quality but noticed the the hose fitting at the bottom of the flow meter is at angle when tightened. I was unable to get it sitting straight on tightening.
-
Works well.
-
The flow meter was easy to fit to the gas regulator. I followed the advice and marked the ball bearing with a line so that I could see if any low levels of gas was flowing when it should not be flowing.
-
Happy
-
Great flow meter
-
Nice little flow meter
-
***
-
Good Quality for price, I use it with my Argon gas regulator which helps regulate the gas more efficiently and saves on gas. Would recommend for any home DIY mig Welding!
-
Good quality and great value for money.
-
Easy control and view of gas flow at a glance.
-
This is just what is needed for finer gas control. Make it part of the standard package.
-
Value for money product that works as expected.
-
Good for checking gas usage. good quality!
-
For checking gas flow monitoring on various equipment not only welding equipment.quality compaired to other meters I have had before
-
Seems of good quality.
-
Great for the money
-
It?s a ball in a tube, it hasn?t fell out yet.
-
Cheap and reliable
-
Use flow meters for all my TIG & MIG welding. It ensures consistent reliable setting up and saves gas.
-
Does the job fine,
-
Perfect fit between regulators and welder
-
This is great to have fixed in line, to give you a clear measure of how much shield gas you are supplying. I set up as recommended and everything just worked.
-
great product
-
Used in addition to the standard two dial regulator. I find this gives an easy to see visual indication of the gas flow. Nice quality and highly recommended.
-
I've only just started using it but seems good value. Time will tell
-
As far as I can tell, this seems to be perfect adequate for the job.
-
Used to control gas flow at low volume hence less waste. Used in gas mig welding operations
-
Got this to cut down on waste and so I know the torch is getting the amount of gas it needs, not just a hissing sound, I'm sure when you are an expart you can set the flow by ear, until then I'll go with the flow meter. Great quality once again.
-
It works.
-
Good bit of kit.
-
Not used it yet, still setting up the workshop
-
Smashing
-
Easy to fit and saves you gas what couldn't be better
-
I purchased this to add to my current regulator as these give a more accurate reading, i have set it up and tested it to find out that i was using more gas than my old regulator was reading. Seems to be well built and works good. Would recommend to anyone who wants to save money on sheilding and get a true reading on LPM flow rate.
-
Good flow Meter. What else to say.
-
Great quality unit.
-
great
-
Argon flow regulator used to set up a second Argon/CO2 bottle for MIG. Nicely made, great value and works well.,
-
Home use, does what it says on the tin.
-
Will be used in conjunction with my new Tig seems good quality and a must when using Tig/Mig
-
Flow regulator for Tig Recommended product Great quality
-
Easy to read , pressure & flow , east to connect & disconnect ,
-
Tig welder, recommend to anyone requiring a similar product and a good quality fair priced unit.
-
Looks fine to early to tell how it performs in service.
-
Worked very well easy to fit worth the money. *** ***
-
A definite plus, well made
-
Good quality flow meter, 👌
-
good
-
The quality is very good a robust part and seems accurate when compared side by side with the regulator. Only had it a few days but r-tech?s service is excellent we had a dodgy regulator which was replaced no quibble.
-
Useful product
-
There?s were some scratches on the outer plastic but it was working as it should
-
This I found very useful as an accurate indication on gas usage I expect to save quite a lot on gas
-
>> Used for working on personal projects. >> Would recommend to like minded friends and colleagues. >> Unit appears to be of good quality
-
The flow meter is on a mig welder, very good job ,think I was using far too much argon with the regulator valve ,good quality product
-
It works, well made and seem very good value
-
Meters the flow of argon as it?s supposed to 👍
-
I run my own carpentry business and every now and then something needs welding, I have a MIG welder but also use the TIG where precision is needed. So very infrequent but it saves me lots of time and money in the long run. The machine is very well made and gives very good ability for control and usability considering it can be months between use.
-
Great Product at a great price
-
I am using the flow meter for various DIY projects I would certainly ecommend to family and friends. This is a high quality, robust product which I am very impressed with
-
Good quality items at a good price sent as quickly as is possible. Appreciate the effort!
-
It has improved my gas consumption measurably as i used to use just the dial type to set flow rates and this is so much easier to read and set to the desired CFM. I wish I had used one sooner. First class
-
Product appears to work really well, and carried out the modification with the sharpie pen as per the video to aid in viewing the line.
-
Quality product
-
Does the job it was designed for. A good, reasonably priced product.
-
Very hapoy with services and equipment. Highly recommended
-
Used to properly regulate gas flow, would recommend to anyone over dial gauges, good quality item.
-
Great value, couldn't be without it
-
Item as described, cannot fault it.
-
Does what it says on the tin
-
Does what it says on the tin
-
Good price works well came fast. Also used the online chat to confirm a connection concern I had
-
Regulate flow, any welder
-
Does the job, nice to have a little buffer spring at the top incase of heavy handed gas opening.
-
Use this product for scratch Tig welding. Great quality flow meter. Highly recommended.
-
Well made
-
Part fit my gauge and working perfectly thanks again for your service
-
Tig welder package was well priced,and setup was easy. It functions very well and is easy to use.
-
an essential piece of kit
-
Have not used the product as yet.
-
Great product
-
Simple and good quality, time will tell on longevity
-
Works well even put one on my mig now
-
Great product and has saved me gas
-
Excellent
-
The Argon Flow Meter is very easy to connect and set up. The 'Green' tap is a plastic 'push on' type and being new presents no problem but after much use it might have been better to have a 'metal' type that is fixed to the Flow Meter with a nut ?
-
Used in home workshop. Very useful to see gas flow in an instant. Thinking of using one on my MIG machine too, as it?s so useful.
-
An excellent addition, though I feel this should have been included with the standard set up. Yes it's an added extra but for ?7 ish Rtech would be putting the cherry on top.
-
Goods look good, do the job and are quality.
-
I have used the product and I am more than happy, I would recommend this to anyone interested, this item does seem to be of high quality again I am very impressed
-
Good quality, would recommend
-
should have been part of the whole kit really, I don't understand why they supply a regulator that includes this. The control knob is quite touchy, needs a little resistance to the turn
-
works very well
-
Top quality
-
Not used it yet, but I'm sure it will be fine.
-
great
-
This is a must for anyone welding with gas. This is a good quality item, although only 4 stars because the flow scale is on the wrong side of the gauge for my set up and you can't rotate the glass.
-
Excellent, quality product that saves wasting expensive gas.
-
Never used one of these until now. Disappointed to find that the tail was too small for the hose supplied.
-
Good price
-
Very useful, gives precise control of gas flow
-
Has proven to be a valuable purchase to accurately control flow of gas
-
Top notch and at the right price
-
Great product
-
Had my mig welder for near on thirty years never had a flow meter on it ! Saw a video how to save money on gas and thought for that price I?d give it a try what?s the worst that can happen. Straight away I had to turn the pressure down and the sound of gas is now barely audible so I?ve been wasting gas for thirty years nearly. Any one using welding gas without a flow meter get one ordered I recon it will pay for itself in one to two full size bottles. Watch the video about marking the ball with a sharpie as well top tip 👍 To sum up excellent quality product that will pay for itself in no time at all
-
Nicely made, easy to set up.
-
easy to use important job
-
Works great
-
Good quality product
-
Excellent flow meter, very well made and real value for money
-
Great
-
*** used with Butters 170 Mig welder and 20 ltr 230bar bottle recommended to anyone who buys Gas. good tip about marking the ball for visibility at low flow
-
Does the job great
-
Use it every time I weld. Good quality I'd recommend it for any one who does welding as it saves gas which saves money so it's a win win situation
-
great price
-
Works a treat, was using to much gas before, this gives me more control. Perfect
-
Saw the ad for the gas flow regulator. Not very happy with my existing regulator set up and sure I use too much shielding gas. Very easy to fit - did the marker pen mod as suggested in your video. Very easy to now adjust to the best gas flow rate.
-
good quality flow meter.
-
Ace piece of kit . A must have
-
Well worth was surprised to see how much gas I was wasting
-
excellent
-
Really useful, good piece of kit.
-
Use the product in my workshop when repairing / constructing items for my tree surgery business, recommend your products to friends and relatives
-
Quality at an affordable price
-
fort a modification to existing equipment
-
good
-
I use this for mig welding I would definitely recommend the flow gauge Quality wise it feels quite robust so I would say it?s good quality
-
Does what it says on the tin
-
Good quality,essential for welding to reduce wasted gas and improve weld quality.
-
Used with my Argon bottle it's really well made and seems very accurate.
-
Well satisfied with service and with tips on internet
-
Flow meter connects easily and works well.
-
Good quality ,well made wish I'd got one a long time ago.
-
It does what it says on the tin.
-
Does the job.
-
Great product- well made, delivered quickly. Just like all R tech products.
-
Excellent from start to finish
-
Nice simple kit that you can rotate to see the scale from any directions
-
Well mate does exactly what it should do
-
Great
-
Good
-
It works which is nice as other equiptment bought else where has not
-
Great quality for the price. Performed faultlessly.
-
Prompt delivery. Referenced their setup video for install. Works as stated.
-
Standard, so good.
-
Great service, always recommending E-Tech to everybody I know who welds
-
Tig welding for stainless steel exhaust and would recommend your products. The quality is not as good as my other flow meter but I feel that's the way most products and tool's are going these days with the *** import's
-
Good
-
Great bit of kit. Thank you.
-
Just what I needed, good quality at a great price.
-
Good quality item.
-
Good product - does what it says on the tin
-
Could be useful to include a right angle adapter for argon cylinders that have their fitting horizontal.
-
Excellent quality
-
used on my tig welder , would recommend to anyone , quality is reflected in the price
-
Better than a gauge, well made and should save wasting gas. Would recommend one of this for your gas supply.
-
Not used yet but included free of charge.
-
Meters flow.
-
Inhouse Everyone Good
-
Works just as it should, well made.
-
using for hobby use and repairs recommend to anyone from household use to garage and factory use good quality products
-
Again, why would you not have one?
-
Flow meter 🤷🏻??? easy to read
-
Excellent quality, backed up with 3 year warranty. My first experience with TiG, but the easy setup was good to get me going.
-
Does what it says
-
have not used that yet.
-
We are a refrigeration company who have to do certain amounts of welding. This product helps us identify our use of gas - exactly what we needed
-
Only issue is that with the single stage argon regulator the markings end up on the wrong side so you cannot easily read them - the flow markings should really go all around the glass section Makes setting flow nice and easy
-
Product used for Mig welding, well made and does exactly what it should. Very pleased with this product
-
For tig welding , seems to be ok and would recommend it
-
Works fine on my mig welder
-
It works not much else to say
-
Excellent as always.
-
Great Product
-
Good
-
We use the flow meter to economise on our Argon consumption during Tig welding. The quality is good, and it works well
-
N/A
-
Quality is good,
-
Good value
-
As described.
-
Flow meter works well.
-
Simple and useful,more precise than a huge.
-
Very good and quick service
-
Excellent product used it for the first time today and the difference in my welds is very noticeable. I was obviously using too little gas before I used this.
-
I havent used it yet
-
easier to set the flow rate with
-
part of tig welding gas supply, more accurate gas control, would recommend to friends and colleagues. Quality appears good, only time will tell.
-
Very happy with this product, quick delivery
-
Works very well
-
Nice flow meter 👍🏻
-
Hobby/intermittent demanding use Would easily recommend to other hobbyists and professional friends Good quality
-
I thought I would treat myself to a TIG welder after using MIG for so long. After much searching and comparing, I settled on the R-Tech TIG 161 AC/DC 160Amp. A few more knobs and buttons than my old MIG and I'm happy to say that for me it meant that it is more controllable and easy to use. After a few test welds, took on my sons Golf R32 exhaust! Excellent product and well made, would highly recommend this TIG.
-
Excellent quality product, cheaper than Ebay. Next day delivery.
-
Does what it says on the tin.
-
Works well not bad quality
-
One of the best flow meters on the market for the money you pay.
-
Accurate and well built
-
Starpart product good quality for the job. Litres flow on gauge not as accurate as ball flow meter purchase separately.
-
Good solid well priced product
-
Good quality, installed in 5minutes.
-
Professional kit
-
Good quality, but you do get a dial flow meter with regulator. I prefer ball type meter for easy visualisation
-
Part of our High Efficiency Argon management service at Solex Engineering Solutions Ltd Not fitted yet but look fine.
-
So far so good.
-
Just getting started with this welder Flow meter work fine
-
precise equipment
-
Seems to do the job it's suppose to!
-
If you fit it, as expected, directly to the gas fittings (valve/dial) then it faces the opposite way to the pressure gauges!
-
Spot on
-
The welding flow meters are as good as others supply at a much greater cost.
-
Business use with tig welder. Others in the industry. Exceptional quality.
-
Perfect to fine tune/control your gas flow, couldn?t be without it. Probably saves it?s cost on the price of one bottle of argon easy. Purchased two of these, one for the torch flow and one to control the back purge. Nice fine control and nicly made. Comes with the 3/8 tails also to connect your own hose if needed.
-
Does what it says on the tin!
-
Good robust design and quality, cheapest on the net
-
Finally got to use the new kit, works very well. Great service from R-Tech
-
Good
-
good quality
-
Very straightforward to use and very cheap. I expect to recoup its cost probably within the first bottle of gas
-
Perfect
-
Used for tig Welding as a business user. Quality part.
-
Bought the 160 AC/DC TIG welder with H/F start. Lovely machine. Easy to set up and use. Bought for hobby use and worth every penny. Highly recommended.
-
Great! Easy to use .
-
Does what its susposed to
-
Will let you know when we use it for the first time. Should prove invaluable for fine control of gas
-
welding
-
I want to explore welding stainless and purging.
-
Accurate enough flow meter. However with my gas setup it's difficult to get the flow rate measures to be visible. Ideally they'd be printed on both sides or around the whole cylinder.
-
Feels a bit cheap but does the job so can?t complain really for the price.
-
very useful, as recommended
-
Great product and helps to ensure careful gas usage.
-
good quality product
-
Great product
-
Great product. Would be nice if it came with an adapter so I can fit it to my other side of my regulator. And can?t find what adapter I need.
-
Recommended
-
Top quality piece of kit
-
Seems to be of good quality and does what it should.
-
Guage seems to work well and hopefully reduces waste of gas.
-
Good strong heavy works 100%
-
Good
-
Sturdy feeling product, bought two to enable me to back purge while welding and they both work great.
-
...
-
I had to send one back as it was faulty. Not good.
-
I use my mig welder for various things as a maintenance electrician, both at home and at work. I would recommend there products to any one, from a complete beginner to a seasoned professional. The quality is outstanding and so to is the after service.
-
Does the job fits straight on their mig180.
-
Once installed it works as expected, if you?re new to MIG welders watch the video before installing, or it could get away from you!!!
-
Product quality is excellent
-
home use TIG welder for motorcycle restoration good quality item
-
Fits nicely with the Tig welder I bought from Rtech. Should save some gas!
-
Great service, very good quality welding equipment ***
-
perfect addition for my new Tig welder
-
The argon flowmeters are very presice. Excellent quality 😊
-
Good quality, clear scaling, I would recommend it.
-
Good gear
-
Easy to use good quality
-
Easy to fit, but I had to *ahem* "trim" the bottle valve guard on my SGS bottle to get the regulator in the right spot and the has flow meter in the vertical orientation.
-
Excellent product
-
this helps
-
Good investment nice to get an accurate gas flow reading.
-
The flow meter works very well.
-
I purchased this for my son and he is thrilled
-
I haven't tried it yet
-
argon flow meter and regulator great price and quick delivery as always
-
Good quality part. Gives finer control, and more accurate reading than the dial flow meter that is included with the bottle regulator.
-
good for the price
-
Does the job.
-
great
-
does as it says ,nice product.
-
Just as described
-
All good works well
-
Does what it advertises... does it well
-
*****
-
Very useful
-
good quality rods,
-
***
-
Spot on .
-
It is a must to stop you wasting expensive gas does the job well
-
No idea if it works yet, hopefully it saves some gas worth a chance
-
Does well what it is supposed to do.
-
Easy to read and adjust fit perfect no leaks.
-
Hard to form an opinion, it just works well.
-
A good flowmeter - no problems
-
Use it at home workshop on my Drag car Excellent quality and informed friends.
-
Very good price but not used yet as I?ve changed to ***
-
Highly recommend the kit excellent quality
-
great thanks
-
Great
-
Good quality product, will save gas, more accurate to set gas flow rate.
-
Good quality product helps keep a eye on your gas usage good kit.
-
Ok, dose want you need it to do
-
It does the job nicely with better accuracy than the dial gauges
-
It works, nothing else to add
-
Does what it should
-
Great price
-
As for welder
-
It does wot it says on the tin
-
Will pay for itself in no time due to using just the amount of gas i need
-
Very useful monitoring the gas flow
-
Great, Helps set correct gas flow and save some Argon.
-
Item was as described. Delivered quickly.
-
Good quality, works as expected.
-
Does what it sayes
-
useful for fine tuning the flow rate.
-
Does the job at a cheap price.
-
Small simple device that does what it says on the tin! Only problem is that it tends to foul the "handle" on my argon cylinder but that is removable!
-
Works as I hoped.Easier to monitor gas flow.
-
Excellent
-
As described
-
Does what it is supposed to do. Good piece of kit.
-
Flow meeter works well
-
I now have two of these, both on Hobby-Weld Argon cylinders. The smaller cylinder has rigid fittings and the Flow Meter sits vertically and works well. That on the larger 'Argon Ultra' cylinder is attached via a quick connector (similar to an air line) that is neither rigid nor horizontal. The Flow Meter still works but I suspect its accuracy may be affected. This is not the fault of the product which is well made and fit for purpose just an observation for anyone wanting one for an 'Ultra' cylinder.
-
Its a flow meter, good quality and it does what it says....can't ask for more.
-
Ordered with the welder and works like a flow meter should.
-
It fitted the regulator on my Hobby-Weld Argon bottle without modification is well made and excellent value.
-
Works well made and meters flow.
-
OK so far
-
Good quality
-
Packaged well to avoid damage and look like top quality product
-
Excellent quality
-
A1very good
-
Works fine.
-
Great product
-
should help save gas
-
Excellent
-
Well built, nothing to go wrong really.
-
easy to set and good control
-
Easy to read gas flow
-
connected to my tig welder for use onstainless steel and mild steel
-
Well made
-
product in use and no issues have been reported
-
Flow meter. These are very useful.
-
Excellent
-
Good price
-
Well made and good quality. Not hooked it up yet.
-
first class
-
Good price, does the job.
-
Good quality but good value
-
This allows the correct pressure of gas to be regulated without waste.
-
as would be expected
-
It seems well made and does what it says on the tin.
-
good price product as discribed
-
Nice quality and price
-
Useful item, well priced and does the job.
-
Seems to work just fine. Some instructions as to how to fit would have been useful. Worked it out but a simple diagram would have helped.
-
Good helps save gas
-
Good quality and price.
-
Saves gas and makes for consistent results
-
Easy to install and adjust for gas flow.
-
Great product.
-
Use is hobby welding and would recommend to anyone
-
The flow meter connects to the gas line and the little ball in the clear glass thing shows the amount of gas being used, quality is good and it works
-
For next to no money you can save on wasting argon :)
-
As it says on the tin
-
Good Quality product
-
Product used for personal welding jobs Recomend to every body
-
Great value little flow meter! Saves wasting too much gas. Worth running inline for that little extra tuning.
-
Exellent product I use it for hobby prodgects Recommend to all
-
Didn't fit the gauge, no excuse
-
A more accurate gauge of the gas flow is achieved with the glass tube variety of flow meter. Good quality.
-
its a flow meter and it does what it is supposed to do
-
The welder behaved faultlessly.... unlike the operator...
-
ideal for accurate flow monitoring giving confidence that gas flow is constant and accurate.
-
Ideal for regulating and not wasting gas.
-
easily installed and a must if you are Tig welding
-
Great value for money.
-
Works well
-
excellent service and product fine
-
I have never used a flow meter before. I am now in control of my gas usage to get optimum performance from my welder.
-
Nice gloves
-
After working out which way everything twists (a novice here!) it works...
-
good
-
Saves very expensive gas.
-
Quality is acceptable, could be a tad more refined, but nonetheless it works.
Guide
25 Minute read
Article
10 Minute read
Article
10 Minute read
Video
25 Minute viewing