TIG Torch Adaptor 35/50 to 3/8 BSP to Quick Release Fitting

Decent product reasonable price

Another quality item

5/5

Good adaptor

Quality is good.

Excellent as always!

Have not used it yet but looks good

I'm glad I acquired a CK TL26 4M Air Cooled TIG Torch with Flexi Head. It's so much easier to work with than the one that came with my R-Tech TIG welder, which is fine for starting out but is rather cumbersome. It felt like trying to manipulate a dead snake with rigor mortis setting in. The CKTL26 is lighter and more flexible, allowing you to concentrate on welding, and you can hold it like a pen because it's slim.

works well good quality

Good quality equipment again.

Great product and easy set up

Worked perfect. !!

Fantastic product and service

Great service and advice, fast delivery. Very nice product.

Great little adapter.

Perfect product

Perfect

Excellent quality

Great product, easy to fit, a nice addition to my TIG setup.

fine

Easy to use

excellent

I recommend this product.

Very good item, only bettered by the customer service which was excellent, as always

Tig Friends Good quality

Great

Does what it says but a star knocked off as the quick connect gas fitting was a poor fit and required some fettling to lock in

Enabled me to use a smaller torch which I already owned. Adapter was spot on

The dinse adapter was purchased to use a ck torch with my new Rtech 170 ac/dc tig welder. However the adapter was 5mm longer than the item supplied with the new welder and needed to be cut to fit.

good value

Fits the torch very well, and good value

Great products

Used for adapting my new torch for Tig welding, I recommend *** to everyone Good quality as usual

does what it should

Does what it says on the tin

Well made

Works

Good, easy to use product.

Perfect

Required accessory for using CK torch with R-tech TIG welder. One negative is that the ** where the gas connects to the main hose points to the ground when the connector is secured, which makes it too much bent/stressed when the welder is on the ground. Eeasy fix to to put something under the welder.

Perfect product to connect my new CK worldwide tig torch to my existing set up.

Good quality does exactly what it says and helped me fit my new torch with ease

Very good highly recommend

Excellent. First class.

Looks excellent

***

This device as advised worked perfectly allowing me to connect the CK9 torch with my R-tech 160 TIG welder.

Quality product

Seems well made, good tight fit, well worth the money

Does the job

Great quality I would recommend for users of jasic Tig welders which require the use of dinse adapters

Good product

Perfect for my AC/DC 161 tig. Easy to fit to my ck torch 👍🏻

Good quality, easy to use. Quick set up.

Nice product, fits well, no leaks and reasonably priced. Win.

Does what it should

It does the job

It’s quality bit of kit

DIY friends very good

As described, works well, good quality.

Good equipment

Cant Recommend Enough

Used to adapt a CK 9 torch to my TIG 161 acdc machine. Spot on adapts power and gas very easilly to this torch.

It does what it says !

Have not received my product yet but looks great!

Good

got a ck torch

Good quality kit, prompt delivery

Recommend product to who ever needs the adapter good quality

as described

Fair price. Good delivery time. Straight fit to a jasic TIG welder - ideal

Quality good

Good quality product

as described good product

Does what it says on the tin, don’t see the point in spending extra for the CK one. I had to cut the quick release fitting off and install a different one to fit my welder’s gas outlet, but this was easy.

Great

Great product fitted my r-tech Tig AC,DC,210 with no problem. 👍👍.

Not much to say about this one other than it appears to be nicely made and fit perfectly between the machine and the CK torch.

First class quality and fitted my welder and torch combo precisely

not used yet.

Product exactly what it is meant to do at a good price.

Great product would recommend 100%

easy to use and set up with new ***, quality is very good, plug and play not touched since installation, build quality very very good

Does what it should, could have done with a longer water cooler hose on it

Item ok

Nice construction.

Very good value for money, does the job well of connecting a CK Worldwide WP9 torch to one of R-Tech's Tig 161 machines.

Fits my machine and very good value for the price.

Great and reasonably priced

*** what it says

Works well

Good

Good value.

Easy and does what it's supposed to do. Saved me a headache. The quality is nice.

Would recommend the product even for the hobbyist as it makes the whole process of welding easier coupled with the known quality that r tech provides.

The tech team advised me to what I needed to suit my welding machine that I am using for hobby pursuits ( motorcycle building) I would recommend R -tech tig to friends and colleagues.

Seems good quality and does what it’s supposed to. Was a little stiff when first fitted but soon freed up.

Excellent quality adapter that fits and works a treat on the R-tech machines. Highly recommended.

Does the job but not the best. The machining on the *** *** that plugs into the machine doesn’t allow it to lock in properly so it can come out. Some fettling with a file should sort it.

Good price and quality.

fitted to save time and trouble dis/connecting my tig cable on my RTech tig machine. very good quality part .Useful to any tig welder who moves and stores set in pieces.

Very lightweight and flexible cable needs good connections, and this is it.

All as advertised - very happy with product and would reccomend.

excellent

Need to work this one out, does not initial fit with out a bit of playing with to work out how, the standard torch fit straight in, this one gives you a question mark will it, until you work it out. 5* if I had the warning or it just fitted. lubed the back plastic then now problem.

Dose what it's meant too

Good quality, reasonable price.

Spot on

used to fit CK superflex hose & torch to Dinse output, Anyone with the same setup Rubber insulation was too big & it wouldn't fit in the Dinse connector - filed rubber & modified to fit - now works well!!

good quality adapter. fits straight to my jasic TIG machine without modification!

Great item, fits well.

Great quality.

home workshop use. Supplied with a new CK flex head No 9 torch kit and does exactly what it should.

Used to convert CK9 torch to R-Tech TIG welder with quick release gas fitting, good product.

Good product

All OK works

Used to adapt my little dc inverter welder to take a 3/8bsp ck9 torch. Works a treat.

Much more affordable ***

Needed for my R-Tech Tig welder to connect an additional torch. Nice product, good price.

Top quality at a great price.

recommend to all ,quality very good ,

Does the job perfectly

I was recommended this product by the staff at R-Tech as a cheap, reliable alternative to the CK equivalent. It saved me £*** and does the job perfectly on my SIP 215P

Great adapter when you need one. Well assembled with good fittings.

Mike assisted in heloing me update a pre 2014 machine, kit fit very well! Allows me to run my ck9 torch, very happy!